Unit is Dimensions: 6x6x4 sealed and can be installed indoors or outdoors All
Nema R 3 out door enclosure All same price
No adjustments , No maintenance, No moving parts
200 and 400 amp house units
# phase units for commerical as well
Nema R 3 out door enclosure All same price
No adjustments , No maintenance, No moving parts
200 and 400 amp house units
# phase units for commerical as well
| REDUCE YOUR POWER BILL |
 | |  | |  | |  | |  | |  |
Start Saving Money on your Electricity Bill in a matter of days!
Enjoy that extra $20, 30, possibly even $50 or more EVERY
month and spend it on something you love
How Does it Work?
When a motor in your home starts, it asks your utility company's transformer for power. The demand of electricity
from your motor runs through the wiring in your home, to the panel box, traveling to your meter, finally reaching its
destination of the transformer and back down to your home again. Throughout this process, the lines/wiring heats up
and strains the motor and wiring. The heat generated is called watts.
During a normal electrical process, there is lost energy that you are being billed for by your energy company but are
not able to use.
The Electric Saver stores (otherwise lost energy/watts) and releases energy to your motor when needed to function
properly. This reduces the amount of heat on the wires and the motors in your home. Reducing this heat will lower
your electricity bill and increase the life of your motors in your home. Inductive Motors are in your Refrigerator,
Freezer, Washer, Dryer, Ceiling Fans, Air Conditioning Units, etc. If you use the old T-12 Fluorescent Lighting, the
ballast is also an inductive load. Anything with a copper winding that creates an electromagnetic field is an inductive
load, just like your inverter that turns DC current into AC current.
Using methods from large industrial complexes, The Electric Saver reclaims wasted energy and recycles electrical
energy. It protects against power surges and increases the capacity to your electrical panel by causing it to run
cooler. By doing so, this saves you money $$$$$!
When a motor in your home starts, it asks your utility company's transformer for power. The demand of electricity
from your motor runs through the wiring in your home, to the panel box, traveling to your meter, finally reaching its
destination of the transformer and back down to your home again. Throughout this process, the lines/wiring heats up
and strains the motor and wiring. The heat generated is called watts.
During a normal electrical process, there is lost energy that you are being billed for by your energy company but are
not able to use.
The Electric Saver stores (otherwise lost energy/watts) and releases energy to your motor when needed to function
properly. This reduces the amount of heat on the wires and the motors in your home. Reducing this heat will lower
your electricity bill and increase the life of your motors in your home. Inductive Motors are in your Refrigerator,
Freezer, Washer, Dryer, Ceiling Fans, Air Conditioning Units, etc. If you use the old T-12 Fluorescent Lighting, the
ballast is also an inductive load. Anything with a copper winding that creates an electromagnetic field is an inductive
load, just like your inverter that turns DC current into AC current.
Using methods from large industrial complexes, The Electric Saver reclaims wasted energy and recycles electrical
energy. It protects against power surges and increases the capacity to your electrical panel by causing it to run
cooler. By doing so, this saves you money $$$$$!
With todays ever increasing energy costs, anyone who owns a home and pays an electric utility bill should also own a
Power-Save 1200 energy saver. Installed quickly and neatly by Morrisville Electric next to your current electrical
breaker panel, the Power-Save 1200 can start saving you money as soon as it’s turned on. Installation of the Power-
Save also protects your entire home from electrical power surges. Contact Morrisville Electric to discuss benefits of
purchasing and installing this product including:
Reduction of electrical bills of up to 25% per month (although average is 15%-20%)
Increased motor and appliance life
Eliminates power surges that can damage your electrical appliances and equipment
Reduction of noise in electrical system
Power Factor optimization
UL Tested and Listed
CSA Certified
Use On Any House
, as long as you have a circuit breaker panel with breaker switches and not the old screw in type fuses, the unit will
work on any single-phase electric application for homes. If you say “yes” to only two or more of the following then you
could be saving a significant amount of money on your electric bill right now!
Is your home over 2500 Square feet?
Is your central air conditioner / heat pump unit 3 years or older?
Is your forced air furnace 3 years or older?
Do you have a pool?
Do you have a well?
Do you use an air conditioner?
Is your refrigerator / freezer not EnergyStar rated?
Do you have more than one refrigerator / freezer?
Is your washer / dryer not EnergyStar rated?
Do you have a hot tub or a jacuzzi?
Is your dishwasher not EnergyStar rated?
Do you have a number of appliances in your home? With todays ever increasing energy costs, anyone who owns a
home and pays an electric utility bill should also own a Power-Save 1200 energy saver. Installed quickly and neatly
next to your current electrical breaker panel, the Power-Save 1200 can start saving you money as soon as it’s turned
on. Installation of the Power-Save also protects your entire home from electrical power surges. Benefits of purchasing
and installing this product include:
, as long as you have a circuit breaker panel with breaker switches and not the old screw in type fuses, the unit will
work on any single-phase electric application for homes. If you say “yes” to only two or more of the following then you
could be saving a significant amount of money on your electric bill right now!
Is your home over 2500 Square feet?
Is your central air conditioner / heat pump unit 3 years or older?
Is your forced air furnace 3 years or older?
Do you have a pool?
Do you have a well?
Do you use an air conditioner?
Is your refrigerator / freezer not EnergyStar rated?
Do you have more than one refrigerator / freezer?
Is your washer / dryer not EnergyStar rated?
Do you have a hot tub or a jacuzzi?
Is your dishwasher not EnergyStar rated?
Do you have a number of appliances in your home? With todays ever increasing energy costs, anyone who owns a
home and pays an electric utility bill should also own a Power-Save 1200 energy saver. Installed quickly and neatly
next to your current electrical breaker panel, the Power-Save 1200 can start saving you money as soon as it’s turned
on. Installation of the Power-Save also protects your entire home from electrical power surges. Benefits of purchasing
and installing this product include: